|
|
02-17-2004, 07:46 AM
|
|||
|
|||
|
Freezing live tv all of a sudden.. and recordings
Heya ,
After playing a little with putting new drivers in and what not , my system now freezes when watching live tv , we recorded survivor inferno last night and watched it and it would play and jump around in audio and then freezes on a frame etc.. We then tried to watch live tv and it freezes and jerks all around on live tv now too , I uninstalled everything and installed from scratch "except beyond tv" <--just the drivers , i put back the ones from the cd , that were working previousley and now they are doing the same thing , cpu usage during tv watching is only like 29% but yet it still freezes up and stuff , this is more than the occasional little jump that some people consider an annoyance , this is unbearable , any ideas??? I just tried to watch a recording of david blane that was recorded after all the changes and it's the same problem , dvd's are playing back fine , in power dvd , just beyond tv seems to be giving me trouble... If I play the videos in winamp they play fine , unless they were recorded after changes ,such as roadrules...
__________________
My HTPC: Body: Antec Overture Screen: 36" RCA VGA Monitor UndertheHood - Abit nf7-s -AMD XP1800+ Jiuhb @ 2.0ghz. - 512M Corsair PC2700.- Nvidia 64m 8x ti4600. - memorex dualformat dvd + - r + - rw - samsung cdrw/dvd combo drive - 120gig 8mg cache 7200rpm westerndigital - 120gig 8mg cache 7200rpm seagate. 
|
|
02-17-2004, 09:32 AM
|
|||
|
|||
|
another thing I've noticed is that in live mode , the video will get a huge black triangle cut out of the top right corner at times while it's freezing up and the audio keeps going.. here's today's log....
[2/17/2004 01:01:01] Dispatcher stopped the recording: the recording has completed. [2/17/2004 01:01:01] Stopped the MPEG-2 recording 'Monster Garage' successfully. [2/17/2004 01:01:02] TimeShift Sink successfully stopped recording [2/17/2004 01:01:02] Using "Video Tuner" crossbar input. [2/17/2004 01:01:02] Postprocessing of file: g:\tv shows\Monster Garage-(Box Truck Wrestling Car)-2004-02-17-0.mpg successfully submitted to the BatchProcessor [2/17/2004 01:01:03] Tagging of g:\tv shows\Monster Garage-(Box Truck Wrestling Car)-2004-02-17-0.mpg completed. [2/17/2004 01:01:03] Halting the recording engine. [2/17/2004 01:01:03] Recording engine halted. (0) [2/17/2004 02:43:15] Failed to download remote recordings: (0x80004005) EXCEPTION: Connector:Host not found. HRESULT=0x800A1521 - Connector:Unspecified HTTP error. HRESULT=0x800A1518. [2/17/2004 02:43:30] Failed to report status back to SnapStream.Net: EXCEPTION: Connector:Host not found. HRESULT=0x800A1521 - Connector:Unspecified HTTP error. HRESULT=0x800A1518. [2/17/2004 08:13:06] Requested dimensions: 640 x 480 [2/17/2004 08:13:06] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:13:06] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:13:06] MPEG-2 Noise Filter disabled [2/17/2004 08:13:06] MPEG-2 Motion Precision set to 1% [2/17/2004 08:13:06] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:13:06] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:13:06] Default FileFormat is currently: MPEG-2 [2/17/2004 08:13:06] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:13:06] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:13:06] Using "Video Tuner" crossbar input. [2/17/2004 08:13:06] Setting country code: 1 [2/17/2004 08:13:06] Set TV format to NTSC_M. [2/17/2004 08:13:07] Using "Video Tuner" crossbar input. [2/17/2004 08:13:08] Using "Video Tuner" crossbar input. [2/17/2004 08:13:08] Using "Video Tuner" crossbar input. [2/17/2004 08:13:08] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:13:08] Using internal MPEG-2 video decoder for timeshifted TV. [2/17/2004 08:13:09] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:13:19] The Full Screen Interface is closing itself due to a close message. [2/17/2004 08:13:19] Halting the recording engine. [2/17/2004 08:13:19] Recording engine halted. (0) [2/17/2004 08:17:00] Beginning shutdown... [2/17/2004 08:17:00] Stopping all recordings... [2/17/2004 08:17:00] 9. Saving Store Collection XML. [2/17/2004 08:17:01] 8. Stopping Web Service Threads. [2/17/2004 08:17:01] 7. Stopping the IP Monitor. [2/17/2004 08:17:01] 6. Stopping the Worker. [2/17/2004 08:17:02] 5. Stopping the Master. [2/17/2004 08:17:02] Shutting down the Audio Mixer. [2/17/2004 08:17:02] 4. Shutting down IP monitor. [2/17/2004 08:17:02] 3. Shutting down Worker. [2/17/2004 08:17:02] 2. Shutting down Master. [2/17/2004 08:17:02] 1-3. Shutting down Guide Updater. [2/17/2004 08:17:02] 1-2. Shutting down Batch Processor. [2/17/2004 08:17:02] Batch Processor Stopped [2/17/2004 08:17:03] 1. Shutting down Security. [2/17/2004 08:17:03] 3-6. Shutting down Worker Recorder. [2/17/2004 08:17:03] 3-5. Shutting down Worker Storage. [2/17/2004 08:17:03] 3-4. Shutting down Device Collection. [2/17/2004 08:17:03] 3-3. Shutting down Worker Downloader. [2/17/2004 08:17:03] 3-2. Shutting down Worker Transcoder. [2/17/2004 08:17:03] 3-1. Shutting down Tuner Info Collection. [2/17/2004 08:17:03] 2-11. Disconnecting Dispatcher. [2/17/2004 08:17:03] 2-10. Disconnecting Worker Handler Collection [2/17/2004 08:17:03] 2-9. Shutting down Remote Recordings. [2/17/2004 08:17:03] 2-8. Shutting down Master Storage. [2/17/2004 08:17:03] 2-7. Shutting down Master Downloader. [2/17/2004 08:17:03] 2-6. Shutting down Dispatcher. [2/17/2004 08:17:03] 2-5. Shutting down PVR. [2/17/2004 08:17:04] 2-3. Shutting down Master Device Collection. [2/17/2004 08:17:04] 2-2. Shutting down Profile Collection. [2/17/2004 08:17:04] 2-1. Shutting down Worker Handler Collection. [2/17/2004 08:17:05] Shutting down Log. [2/17/2004 08:17:05] ****************************** [2/17/2004 08:25:44] ****************************** [2/17/2004 08:25:44] Starting the Log.... [2/17/2004 08:25:44] Version: 3.4 Build: 899 [2/17/2004 08:25:44] Current License Mode: REGISTERED [2/17/2004 08:25:44] 1-1. Creating Security. [2/17/2004 08:25:45] 1-2. Creating BatchProcessor. [2/17/2004 08:25:45] 1-3. Creating Guide Updater. [2/17/2004 08:25:45] Batch Processor Running [2/17/2004 08:25:45] Guide Updater started. [2/17/2004 08:25:45] 2. Creating Master. [2/17/2004 08:25:45] 2-1. Creating Worker Handler Collection. [2/17/2004 08:25:45] 2-2. Creating Profile Collection. [2/17/2004 08:25:45] 2-3. Creating Master Device Collection. [2/17/2004 08:25:45] 2-5. Creating PVR. [2/17/2004 08:25:46] 2-6. Creating Dispatcher. [2/17/2004 08:25:46] 2-7. Creating Master Downloader. [2/17/2004 08:25:46] 2-8. Creating Master Storage. [2/17/2004 08:25:46] 2-9. Creating Remote Recordings. [2/17/2004 08:25:46] 2-10. Connecting Worker Handler Collection. [2/17/2004 08:25:46] 2-11. Connecting Dispatcher. [2/17/2004 08:25:46] 3. Creating Worker. [2/17/2004 08:25:46] 3-1. Creating Tuner Info Collection. [2/17/2004 08:25:46] 3-3. Creating Worker Downloader. [2/17/2004 08:25:46] 3-4. Creating Device Collection. [2/17/2004 08:25:46] 3-5. Creating Worker Storage. [2/17/2004 08:25:46] 3-6. Creating Worker Recorder. [2/17/2004 08:25:46] 4. Creating IP Monitor. [2/17/2004 08:25:48] 5. Starting up the Master [2/17/2004 08:25:48] 5-1. Starting SnapStream.Net threads. [2/17/2004 08:25:48] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 08:25:48] 6. Starting up the Worker [2/17/2004 08:25:48] Incoming connection from 192.168.10.15 ... [2/17/2004 08:25:48] 7. Starting up the IP Monitor [2/17/2004 08:25:48] 8. Starting Web Service Threads. [2/17/2004 08:25:48] Valid SnapStream.Net subscription found. [2/17/2004 08:25:58] Requested dimensions: 640 x 480 [2/17/2004 08:25:58] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:25:58] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:25:58] MPEG-2 Noise Filter disabled [2/17/2004 08:25:58] MPEG-2 Motion Precision set to 1% [2/17/2004 08:25:58] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:25:58] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:25:58] Default FileFormat is currently: MPEG-2 [2/17/2004 08:25:58] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:25:58] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:25:58] Using "Video Tuner" crossbar input. [2/17/2004 08:25:58] Setting country code: 1 [2/17/2004 08:25:59] Set TV format to NTSC_M. [2/17/2004 08:25:59] Using "Video Tuner" crossbar input. [2/17/2004 08:26:00] Using "Video Tuner" crossbar input. [2/17/2004 08:26:01] Using "Video Tuner" crossbar input. [2/17/2004 08:26:01] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:26:01] Using internal MPEG-2 video decoder for timeshifted TV. [2/17/2004 08:26:01] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:26:13] Halting the recording engine. [2/17/2004 08:26:14] Recording engine halted. (0) [2/17/2004 08:26:17] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:26:40] Beginning shutdown... [2/17/2004 08:26:40] Stopping all recordings... [2/17/2004 08:26:40] 9. Saving Store Collection XML. [2/17/2004 08:26:40] 8. Stopping Web Service Threads. [2/17/2004 08:26:40] 7. Stopping the IP Monitor. [2/17/2004 08:26:42] 6. Stopping the Worker. [2/17/2004 08:26:43] 5. Stopping the Master. [2/17/2004 08:26:44] get_RecordStatus failed to get a response [2/17/2004 08:26:45] Shutting down the Audio Mixer. [2/17/2004 08:26:45] 4. Shutting down IP monitor. [2/17/2004 08:26:45] 3. Shutting down Worker. [2/17/2004 08:26:45] 2. Shutting down Master. [2/17/2004 08:26:45] 1-3. Shutting down Guide Updater. [2/17/2004 08:26:45] 1-2. Shutting down Batch Processor. [2/17/2004 08:26:45] Batch Processor Stopped [2/17/2004 08:26:45] 1. Shutting down Security. [2/17/2004 08:26:45] 3-6. Shutting down Worker Recorder. [2/17/2004 08:26:45] 3-5. Shutting down Worker Storage. [2/17/2004 08:26:45] 3-4. Shutting down Device Collection. [2/17/2004 08:26:45] 3-3. Shutting down Worker Downloader. [2/17/2004 08:26:45] 3-2. Shutting down Worker Transcoder. [2/17/2004 08:26:45] 3-1. Shutting down Tuner Info Collection. [2/17/2004 08:26:45] 2-11. Disconnecting Dispatcher. [2/17/2004 08:26:45] 2-10. Disconnecting Worker Handler Collection [2/17/2004 08:26:45] 2-9. Shutting down Remote Recordings. [2/17/2004 08:26:45] 2-8. Shutting down Master Storage. [2/17/2004 08:26:45] 2-7. Shutting down Master Downloader. [2/17/2004 08:26:45] 2-6. Shutting down Dispatcher. [2/17/2004 08:26:45] 2-5. Shutting down PVR. [2/17/2004 08:26:45] 2-3. Shutting down Master Device Collection. [2/17/2004 08:26:45] 2-2. Shutting down Profile Collection. [2/17/2004 08:26:45] 2-1. Shutting down Worker Handler Collection. [2/17/2004 08:26:47] Shutting down Log. [2/17/2004 08:26:47] ****************************** [2/17/2004 08:26:57] ****************************** [2/17/2004 08:26:57] Starting the Log.... [2/17/2004 08:26:57] Version: 3.4 Build: 899 [2/17/2004 08:26:57] Current License Mode: REGISTERED [2/17/2004 08:26:57] 1-1. Creating Security. [2/17/2004 08:26:58] 2. Creating Master. [2/17/2004 08:26:58] 2-1. Creating Worker Handler Collection. [2/17/2004 08:26:58] 2-2. Creating Profile Collection. [2/17/2004 08:26:58] 2-3. Creating Master Device Collection. [2/17/2004 08:26:58] 2-5. Creating PVR. [2/17/2004 08:26:58] 2-6. Creating Dispatcher. [2/17/2004 08:26:58] 2-7. Creating Master Downloader. [2/17/2004 08:26:58] 2-8. Creating Master Storage. [2/17/2004 08:26:58] 2-9. Creating Remote Recordings. [2/17/2004 08:26:58] 2-10. Connecting Worker Handler Collection. [2/17/2004 08:26:58] 2-11. Connecting Dispatcher. [2/17/2004 08:26:58] 3. Creating Worker. [2/17/2004 08:26:58] 3-1. Creating Tuner Info Collection. [2/17/2004 08:26:58] 3-3. Creating Worker Downloader. [2/17/2004 08:26:58] 3-4. Creating Device Collection. [2/17/2004 08:26:58] 3-5. Creating Worker Storage. [2/17/2004 08:26:58] 3-6. Creating Worker Recorder. [2/17/2004 08:26:58] 4. Creating IP Monitor. [2/17/2004 08:27:37] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:27:37] Requested dimensions: 352 x 240 [2/17/2004 08:27:37] MPEG-2 Video Recording bitrate: 800000 [2/17/2004 08:27:37] MPEG-2 using 2 B-Frames and 2 P-Frames per group [2/17/2004 08:27:37] MPEG-2 Noise Filter enabled and set to 35 [2/17/2004 08:27:37] MPEG-2 Motion Precision set to 100% [2/17/2004 08:27:37] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:27:37] MPEG-2 Audio Sampling Frequency is set to 44100 [2/17/2004 08:27:37] Default FileFormat is currently: MPEG-2 [2/17/2004 08:27:37] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:27:37] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:27:37] Unable to set desired P Frame number. P Frame number set to 4. [2/17/2004 08:27:37] Unable to set desired capture resolution. Capturing at 352 x 480. [2/17/2004 08:27:37] Using "Video Tuner" crossbar input. [2/17/2004 08:27:37] Setting country code: 1 [2/17/2004 08:27:38] Set TV format to NTSC_M. [2/17/2004 08:27:38] Using "Video Tuner" crossbar input. [2/17/2004 08:27:39] Using "Video Tuner" crossbar input. [2/17/2004 08:27:40] Using "Video Tuner" crossbar input. [2/17/2004 08:27:58] Halting the recording engine. [2/17/2004 08:27:58] Recording engine halted. (0) [2/17/2004 08:28:02] Beginning shutdown... [2/17/2004 08:28:02] Stopping all recordings... [2/17/2004 08:28:02] 9. Saving Store Collection XML. [2/17/2004 08:28:03] 8. Stopping Web Service Threads. [2/17/2004 08:28:03] 7. Stopping the IP Monitor. [2/17/2004 08:28:03] 6. Stopping the Worker. [2/17/2004 08:28:03] 5. Stopping the Master. [2/17/2004 08:28:03] Shutting down the Audio Mixer. [2/17/2004 08:28:03] 4. Shutting down IP monitor. [2/17/2004 08:28:03] 3. Shutting down Worker. [2/17/2004 08:28:03] 3-6. Shutting down Worker Recorder. [2/17/2004 08:28:03] 3-5. Shutting down Worker Storage. [2/17/2004 08:28:03] 3-4. Shutting down Device Collection. [2/17/2004 08:28:03] 3-3. Shutting down Worker Downloader. [2/17/2004 08:28:03] 3-2. Shutting down Worker Transcoder. [2/17/2004 08:28:03] 3-1. Shutting down Tuner Info Collection. [2/17/2004 08:28:03] 2. Shutting down Master. [2/17/2004 08:28:03] 2-11. Disconnecting Dispatcher. [2/17/2004 08:28:03] 2-10. Disconnecting Worker Handler Collection [2/17/2004 08:28:03] 2-9. Shutting down Remote Recordings. [2/17/2004 08:28:03] 2-8. Shutting down Master Storage. [2/17/2004 08:28:03] 2-7. Shutting down Master Downloader. [2/17/2004 08:28:03] 2-6. Shutting down Dispatcher. [2/17/2004 08:28:03] 2-5. Shutting down PVR. [2/17/2004 08:28:03] 2-3. Shutting down Master Device Collection. [2/17/2004 08:28:03] 2-2. Shutting down Profile Collection. [2/17/2004 08:28:03] 2-1. Shutting down Worker Handler Collection. [2/17/2004 08:28:03] 1. Shutting down Security. [2/17/2004 08:28:04] Shutting down Log. [2/17/2004 08:28:04] ****************************** [2/17/2004 08:28:06] ****************************** [2/17/2004 08:28:06] Starting the Log.... [2/17/2004 08:28:06] Version: 3.4 Build: 899 [2/17/2004 08:28:06] Current License Mode: REGISTERED [2/17/2004 08:28:06] 1-1. Creating Security. [2/17/2004 08:28:07] 1-2. Creating BatchProcessor. [2/17/2004 08:28:07] Batch Processor Running [2/17/2004 08:28:07] 1-3. Creating Guide Updater. [2/17/2004 08:28:07] 2. Creating Master. [2/17/2004 08:28:07] 2-1. Creating Worker Handler Collection. [2/17/2004 08:28:07] 2-2. Creating Profile Collection. [2/17/2004 08:28:07] 2-3. Creating Master Device Collection. [2/17/2004 08:28:07] 2-5. Creating PVR. [2/17/2004 08:28:07] 2-6. Creating Dispatcher. [2/17/2004 08:28:07] 2-7. Creating Master Downloader. [2/17/2004 08:28:07] 2-8. Creating Master Storage. [2/17/2004 08:28:07] 2-9. Creating Remote Recordings. [2/17/2004 08:28:07] 2-10. Connecting Worker Handler Collection. [2/17/2004 08:28:08] 2-11. Connecting Dispatcher. [2/17/2004 08:28:08] 3. Creating Worker. [2/17/2004 08:28:08] 3-1. Creating Tuner Info Collection. [2/17/2004 08:28:08] 3-3. Creating Worker Downloader. [2/17/2004 08:28:08] 3-4. Creating Device Collection. [2/17/2004 08:28:08] 3-5. Creating Worker Storage. [2/17/2004 08:28:08] 3-6. Creating Worker Recorder. [2/17/2004 08:28:08] 4. Creating IP Monitor. [2/17/2004 08:28:08] Guide Updater started. [2/17/2004 08:28:09] 5. Starting up the Master [2/17/2004 08:28:09] 5-1. Starting SnapStream.Net threads. [2/17/2004 08:28:09] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 08:28:09] 6. Starting up the Worker [2/17/2004 08:28:09] Incoming connection from 192.168.10.15 ... [2/17/2004 08:28:09] 7. Starting up the IP Monitor [2/17/2004 08:28:09] 8. Starting Web Service Threads. [2/17/2004 08:28:09] EPG Update Successful. [2/17/2004 08:28:09] Valid SnapStream.Net subscription found. [2/17/2004 08:28:34] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:30:40] Requested dimensions: 640 x 480 [2/17/2004 08:30:40] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:30:40] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:30:40] MPEG-2 Noise Filter disabled [2/17/2004 08:30:40] MPEG-2 Motion Precision set to 1% [2/17/2004 08:30:40] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:30:40] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:30:40] Default FileFormat is currently: MPEG-2 [2/17/2004 08:30:40] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:30:40] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:30:40] Using "Video Tuner" crossbar input. [2/17/2004 08:30:40] Setting country code: 1 [2/17/2004 08:30:41] Set TV format to NTSC_M. [2/17/2004 08:30:41] Using "Video Tuner" crossbar input. [2/17/2004 08:30:42] Using "Video Tuner" crossbar input. [2/17/2004 08:30:43] Using "Video Tuner" crossbar input. [2/17/2004 08:30:43] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:30:43] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 08:30:43] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 08:30:44] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:31:34] Halting the recording engine. [2/17/2004 08:31:35] Recording engine halted. (0) [2/17/2004 08:32:35] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:34:16] ****************************** [2/17/2004 08:34:16] Starting the Log.... [2/17/2004 08:34:16] Version: 3.4 Build: 899 [2/17/2004 08:34:16] Current License Mode: REGISTERED [2/17/2004 08:34:16] 1-1. Creating Security. [2/17/2004 08:34:17] 1-2. Creating BatchProcessor. [2/17/2004 08:34:18] 1-3. Creating Guide Updater. [2/17/2004 08:34:18] Batch Processor Running [2/17/2004 08:34:18] Guide Updater started. [2/17/2004 08:34:18] 2. Creating Master. [2/17/2004 08:34:18] 2-1. Creating Worker Handler Collection. [2/17/2004 08:34:18] 2-2. Creating Profile Collection. [2/17/2004 08:34:18] 2-3. Creating Master Device Collection. [2/17/2004 08:34:18] 2-5. Creating PVR. [2/17/2004 08:34:18] 2-6. Creating Dispatcher. [2/17/2004 08:34:18] 2-7. Creating Master Downloader. [2/17/2004 08:34:18] 2-8. Creating Master Storage. [2/17/2004 08:34:18] 2-9. Creating Remote Recordings. [2/17/2004 08:34:18] 2-10. Connecting Worker Handler Collection. [2/17/2004 08:34:18] 2-11. Connecting Dispatcher. [2/17/2004 08:34:18] 3. Creating Worker. [2/17/2004 08:34:18] 3-1. Creating Tuner Info Collection. [2/17/2004 08:34:18] 3-3. Creating Worker Downloader. [2/17/2004 08:34:18] 3-4. Creating Device Collection. [2/17/2004 08:34:18] 3-5. Creating Worker Storage. [2/17/2004 08:34:18] 3-6. Creating Worker Recorder. [2/17/2004 08:34:19] 4. Creating IP Monitor. [2/17/2004 08:34:20] 5. Starting up the Master [2/17/2004 08:34:20] 5-1. Starting SnapStream.Net threads. [2/17/2004 08:34:20] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 08:34:20] 6. Starting up the Worker [2/17/2004 08:34:20] Incoming connection from 192.168.10.15 ... [2/17/2004 08:34:20] 7. Starting up the IP Monitor [2/17/2004 08:34:20] 8. Starting Web Service Threads. [2/17/2004 08:34:21] Valid SnapStream.Net subscription found. [2/17/2004 08:34:31] Requested dimensions: 640 x 480 [2/17/2004 08:34:31] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:34:31] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:34:31] MPEG-2 Noise Filter disabled [2/17/2004 08:34:31] MPEG-2 Motion Precision set to 1% [2/17/2004 08:34:31] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:34:31] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:34:31] Default FileFormat is currently: MPEG-2 [2/17/2004 08:34:31] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:34:31] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:34:32] Using "Video Tuner" crossbar input. [2/17/2004 08:34:32] Setting country code: 1 [2/17/2004 08:34:32] Set TV format to NTSC_M. [2/17/2004 08:34:33] Using "Video Tuner" crossbar input. [2/17/2004 08:34:33] Using "Video Tuner" crossbar input. [2/17/2004 08:34:34] Using "Video Tuner" crossbar input. [2/17/2004 08:34:34] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:34:34] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 08:34:34] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 08:34:35] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:34:46] Halting the recording engine. [2/17/2004 08:34:46] Recording engine halted. (0) [2/17/2004 08:34:51] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:38:05] Requested dimensions: 640 x 480 [2/17/2004 08:38:05] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:38:05] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:38:05] MPEG-2 Noise Filter disabled [2/17/2004 08:38:05] MPEG-2 Motion Precision set to 1% [2/17/2004 08:38:05] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:38:05] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:38:05] Default FileFormat is currently: MPEG-2 [2/17/2004 08:38:05] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:38:05] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:38:05] Using "Video Tuner" crossbar input. [2/17/2004 08:38:05] Setting country code: 1 [2/17/2004 08:38:05] Set TV format to NTSC_M. [2/17/2004 08:38:06] Using "Video Tuner" crossbar input. [2/17/2004 08:38:07] Using "Video Tuner" crossbar input. [2/17/2004 08:38:07] Using "Video Tuner" crossbar input. [2/17/2004 08:38:07] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:38:07] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 08:38:07] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 08:38:08] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:38:20] Halting the recording engine. [2/17/2004 08:38:20] Recording engine halted. (0) [2/17/2004 08:38:25] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:42:42] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for playback. [2/17/2004 08:42:42] PlaybackPlayer: VMR9 connected successfully. [2/17/2004 08:43:32] The Full Screen Interface is closing itself due to a close message. [2/17/2004 08:44:22] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for playback. [2/17/2004 08:44:22] PlaybackPlayer: VMR9 connected successfully. [2/17/2004 08:44:30] The Full Screen Interface is closing itself due to a close message. [2/17/2004 08:48:36] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:48:49] Requested dimensions: 640 x 480 [2/17/2004 08:48:49] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:48:49] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:48:49] MPEG-2 Noise Filter disabled [2/17/2004 08:48:49] MPEG-2 Motion Precision set to 1% [2/17/2004 08:48:49] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:48:49] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:48:49] Default FileFormat is currently: MPEG-2 [2/17/2004 08:48:49] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:48:49] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:48:49] Using "Video Tuner" crossbar input. [2/17/2004 08:48:49] Setting country code: 1 [2/17/2004 08:48:50] Set TV format to NTSC_M. [2/17/2004 08:48:50] Using "Video Tuner" crossbar input. [2/17/2004 08:48:51] Using "Video Tuner" crossbar input. [2/17/2004 08:48:51] Using "Video Tuner" crossbar input. [2/17/2004 08:48:52] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:48:52] Using internal MPEG-2 video decoder for timeshifted TV. [2/17/2004 08:48:52] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:49:17] Halting the recording engine. [2/17/2004 08:49:17] Recording engine halted. (0) [2/17/2004 08:49:35] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 08:49:45] The Full Screen Interface is closing itself due to a close message. [2/17/2004 08:58:09] ****************************** [2/17/2004 08:58:09] Starting the Log.... [2/17/2004 08:58:09] Version: 3.4 Build: 899 [2/17/2004 08:58:09] Current License Mode: REGISTERED [2/17/2004 08:58:09] 1-1. Creating Security. [2/17/2004 08:58:11] 1-2. Creating BatchProcessor. [2/17/2004 08:58:11] Batch Processor Running [2/17/2004 08:58:11] 1-3. Creating Guide Updater. [2/17/2004 08:58:11] Guide Updater started. [2/17/2004 08:58:11] 2. Creating Master. [2/17/2004 08:58:11] 2-1. Creating Worker Handler Collection. [2/17/2004 08:58:11] 2-2. Creating Profile Collection. [2/17/2004 08:58:11] 2-3. Creating Master Device Collection. [2/17/2004 08:58:11] 2-5. Creating PVR. [2/17/2004 08:58:11] 2-6. Creating Dispatcher. [2/17/2004 08:58:11] 2-7. Creating Master Downloader. [2/17/2004 08:58:11] 2-8. Creating Master Storage. [2/17/2004 08:58:11] 2-9. Creating Remote Recordings. [2/17/2004 08:58:11] 2-10. Connecting Worker Handler Collection. [2/17/2004 08:58:11] 2-11. Connecting Dispatcher. [2/17/2004 08:58:11] 3. Creating Worker. [2/17/2004 08:58:11] 3-1. Creating Tuner Info Collection. [2/17/2004 08:58:11] 3-3. Creating Worker Downloader. [2/17/2004 08:58:12] 3-4. Creating Device Collection. [2/17/2004 08:58:12] 3-5. Creating Worker Storage. [2/17/2004 08:58:12] 3-6. Creating Worker Recorder. [2/17/2004 08:58:12] 4. Creating IP Monitor. [2/17/2004 08:58:14] 5. Starting up the Master [2/17/2004 08:58:14] 5-1. Starting SnapStream.Net threads. [2/17/2004 08:58:14] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 08:58:14] 6. Starting up the Worker [2/17/2004 08:58:14] Incoming connection from 192.168.10.15 ... [2/17/2004 08:58:14] 7. Starting up the IP Monitor [2/17/2004 08:58:14] 8. Starting Web Service Threads. [2/17/2004 08:58:14] Valid SnapStream.Net subscription found. [2/17/2004 08:58:24] Requested dimensions: 640 x 480 [2/17/2004 08:58:24] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 08:58:24] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 08:58:24] MPEG-2 Noise Filter disabled [2/17/2004 08:58:24] MPEG-2 Motion Precision set to 1% [2/17/2004 08:58:24] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 08:58:24] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 08:58:24] Default FileFormat is currently: MPEG-2 [2/17/2004 08:58:24] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 08:58:24] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 08:58:25] Using "Video Tuner" crossbar input. [2/17/2004 08:58:25] Setting country code: 1 [2/17/2004 08:58:25] Set TV format to NTSC_M. [2/17/2004 08:58:26] Using "Video Tuner" crossbar input. [2/17/2004 08:58:26] Using "Video Tuner" crossbar input. [2/17/2004 08:58:27] Using "Video Tuner" crossbar input. [2/17/2004 08:58:27] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 08:58:27] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 08:58:27] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 08:58:28] TSSourcePlayer: Connected to the VMR9. [2/17/2004 08:58:33] Halting the recording engine. [2/17/2004 08:58:33] Recording engine halted. (0) [2/17/2004 08:58:36] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 09:00:42] Beginning shutdown... [2/17/2004 09:00:42] Stopping all recordings... [2/17/2004 09:00:42] 9. Saving Store Collection XML. [2/17/2004 09:00:42] 8. Stopping Web Service Threads. [2/17/2004 09:00:42] 7. Stopping the IP Monitor. [2/17/2004 09:00:44] 6. Stopping the Worker. [2/17/2004 09:00:46] 5. Stopping the Master. [2/17/2004 09:00:47] Shutting down the Audio Mixer. [2/17/2004 09:00:47] 4. Shutting down IP monitor. [2/17/2004 09:00:47] 3. Shutting down Worker. [2/17/2004 09:00:47] 2. Shutting down Master. [2/17/2004 09:00:47] 1-3. Shutting down Guide Updater. [2/17/2004 09:00:47] 1-2. Shutting down Batch Processor. [2/17/2004 09:00:47] Batch Processor Stopped [2/17/2004 09:00:47] 1. Shutting down Security. [2/17/2004 09:00:48] 3-6. Shutting down Worker Recorder. [2/17/2004 09:00:48] 3-5. Shutting down Worker Storage. [2/17/2004 09:00:48] 3-4. Shutting down Device Collection. [2/17/2004 09:00:48] 3-3. Shutting down Worker Downloader. [2/17/2004 09:00:48] 3-2. Shutting down Worker Transcoder. [2/17/2004 09:00:48] 3-1. Shutting down Tuner Info Collection. [2/17/2004 09:00:48] 2-11. Disconnecting Dispatcher. [2/17/2004 09:00:48] 2-10. Disconnecting Worker Handler Collection [2/17/2004 09:00:48] 2-9. Shutting down Remote Recordings. [2/17/2004 09:00:48] 2-8. Shutting down Master Storage. [2/17/2004 09:00:48] 2-7. Shutting down Master Downloader. [2/17/2004 09:00:48] 2-6. Shutting down Dispatcher. [2/17/2004 09:00:48] 2-5. Shutting down PVR. [2/17/2004 09:00:48] 2-3. Shutting down Master Device Collection. [2/17/2004 09:00:48] 2-2. Shutting down Profile Collection. [2/17/2004 09:00:48] 2-1. Shutting down Worker Handler Collection. [2/17/2004 09:00:50] Shutting down Log. [2/17/2004 09:00:50] ****************************** [2/17/2004 09:08:01] ****************************** [2/17/2004 09:08:01] Starting the Log.... [2/17/2004 09:08:01] Version: 3.4 Build: 1154 [2/17/2004 09:08:01] Current License Mode: REGISTERED [2/17/2004 09:08:01] 1-1. Creating Security. [2/17/2004 09:08:02] 1-2. Creating BatchProcessor. [2/17/2004 09:08:02] 1-3. Creating Guide Updater. [2/17/2004 09:08:02] Batch Processor Running [2/17/2004 09:08:02] 2. Creating Master. [2/17/2004 09:08:02] Guide Updater started. [2/17/2004 09:08:02] 2-1. Creating Worker Handler Collection. [2/17/2004 09:08:02] 2-2. Creating Profile Collection. [2/17/2004 09:08:02] 2-3. Creating Master Device Collection. [2/17/2004 09:08:02] 2-5. Creating PVR. [2/17/2004 09:08:02] 2-6. Creating Dispatcher. [2/17/2004 09:08:02] 2-7. Creating Master Downloader. [2/17/2004 09:08:02] 2-8. Creating Master Storage. [2/17/2004 09:08:02] 2-9. Creating Remote Recordings. [2/17/2004 09:08:02] 2-10. Connecting Worker Handler Collection. [2/17/2004 09:08:02] 2-11. Connecting Dispatcher. [2/17/2004 09:08:02] 3. Creating Worker. [2/17/2004 09:08:02] 3-1. Creating Tuner Info Collection. [2/17/2004 09:08:02] 3-3. Creating Worker Downloader. [2/17/2004 09:08:02] 3-4. Creating Device Collection. [2/17/2004 09:08:02] 3-5. Creating Worker Storage. [2/17/2004 09:08:02] 3-6. Creating Worker Recorder. [2/17/2004 09:08:03] 4. Creating IP Monitor. [2/17/2004 09:08:03] Guide Updater Service: Initializing... [2/17/2004 09:08:03] Guide Updater Service: Downloading data from SnapStream.Net... [2/17/2004 09:08:04] 5. Starting up the Master [2/17/2004 09:08:04] 5-1. Starting SnapStream.Net threads. [2/17/2004 09:08:04] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 09:08:04] 6. Starting up the Worker [2/17/2004 09:08:04] Incoming connection from 192.168.10.15 ... [2/17/2004 09:08:04] 7. Starting up the IP Monitor [2/17/2004 09:08:04] 8. Starting Web Service Threads. [2/17/2004 09:08:05] Valid SnapStream.Net subscription found. [2/17/2004 09:08:15] Requested dimensions: 640 x 480 [2/17/2004 09:08:15] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 09:08:15] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 09:08:15] MPEG-2 Noise Filter disabled [2/17/2004 09:08:15] MPEG-2 Motion Precision set to 1% [2/17/2004 09:08:15] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 09:08:15] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 09:08:15] Default FileFormat is currently: MPEG-2 [2/17/2004 09:08:15] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 09:08:15] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 09:08:15] Using "Video Tuner" crossbar input. [2/17/2004 09:08:15] Setting country code: 1 [2/17/2004 09:08:16] Set TV format to NTSC_M. [2/17/2004 09:08:16] Using "Video Tuner" crossbar input. [2/17/2004 09:08:17] Using "Video Tuner" crossbar input. [2/17/2004 09:08:17] Using "Video Tuner" crossbar input. [2/17/2004 09:08:18] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 09:08:18] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 09:08:18] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 09:08:18] TSSourcePlayer: Connected to the VMR9. [2/17/2004 09:08:26] Halting the recording engine. [2/17/2004 09:08:26] Recording engine halted. (0) [2/17/2004 09:08:30] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 09:09:07] Guide Updater Service: Download complete. Decompressing data... [2/17/2004 09:09:07] Guide Updater Service: Processing new data... [2/17/2004 09:09:11] Guide Updater Service: Processing data complete. Loading new data... [2/17/2004 09:09:12] Guide Updater Service: MDAC version: 2.80 [2/17/2004 09:09:12] Guide Updater Service: Jet Database Engine version: 4.0.8015.0 [2/17/2004 09:09:28] Guide Updater Service: New guide data loaded. Clean update complete. [2/17/2004 10:22:45] Requested dimensions: 640 x 480 [2/17/2004 10:22:45] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 10:22:45] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 10:22:45] MPEG-2 Noise Filter disabled [2/17/2004 10:22:45] MPEG-2 Motion Precision set to 1% [2/17/2004 10:22:45] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 10:22:45] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 10:22:45] Default FileFormat is currently: MPEG-2 [2/17/2004 10:22:45] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 10:22:45] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 10:22:45] Using "Video Tuner" crossbar input. [2/17/2004 10:22:45] Setting country code: 1 [2/17/2004 10:22:46] Set TV format to NTSC_M. [2/17/2004 10:22:46] Using "Video Tuner" crossbar input. [2/17/2004 10:22:47] Using "Video Tuner" crossbar input. [2/17/2004 10:22:48] Using "Video Tuner" crossbar input. [2/17/2004 10:22:48] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 10:22:48] Using third-party MPEG-2 video decoder "InterVideo NonCSS Video Decoder for Hauppauge" for timeshifted TV. [2/17/2004 10:22:48] Decoder guid: 3e0d4870-fd59-441a-a9d1-01ba350e634c [2/17/2004 10:22:48] TSSourcePlayer: Connected to the VMR9. [2/17/2004 10:23:21] The Full Screen Interface is closing itself due to a close message. [2/17/2004 10:23:21] Halting the recording engine. [2/17/2004 10:23:22] Recording engine halted. (0)
__________________
My HTPC: Body: Antec Overture Screen: 36" RCA VGA Monitor UndertheHood - Abit nf7-s -AMD XP1800+ Jiuhb @ 2.0ghz. - 512M Corsair PC2700.- Nvidia 64m 8x ti4600. - memorex dualformat dvd + - r + - rw - samsung cdrw/dvd combo drive - 120gig 8mg cache 7200rpm westerndigital - 120gig 8mg cache 7200rpm seagate.
|
|
02-17-2004, 05:21 PM
|
||||
|
||||
|
Quote:
Also you are running version 899: Ugrade to the latest (1154) from the download page. It's porly marked last I looked as3.4 Full. 1154 was created to get rid of "jerkiness". Never had it myself, so I don't know if tha'ts what you're describing, but you should give it a go. Eric
__________________
Big old Server with plenty of power. 5 HDs and a 280 Nvidia graphic card. Windows XP Pro. Firefly. ZvRemote. 2 Dish Network HD receivers. 2 HDPVRs Out to ZeeVee Box for all HDTVs
|
|
02-17-2004, 05:56 PM
|
|||
|
|||
|
I installed the latest version , today and it didn't seem to fix anything , =( I am now running all old drivers the ones from the cd , and still same thing , this didn't happen before though so I dunno what the deal is ,
I might have solved it by using NVDVD but I dunno if that even had anything to do with live tv , I can't check it untill my fiance gets home but it doesn't make sence that it'd just stop working after weeks of working.
__________________
My HTPC: Body: Antec Overture Screen: 36" RCA VGA Monitor UndertheHood - Abit nf7-s -AMD XP1800+ Jiuhb @ 2.0ghz. - 512M Corsair PC2700.- Nvidia 64m 8x ti4600. - memorex dualformat dvd + - r + - rw - samsung cdrw/dvd combo drive - 120gig 8mg cache 7200rpm westerndigital - 120gig 8mg cache 7200rpm seagate.
|
|
02-17-2004, 10:46 PM
|
||||
|
||||
|
Computers don't always make sense. They hickup and suddenly start acting up after months of good and loyal service.
I usually shoot one of mine for the exemple to teach the other ones to behave  Maybe your Intervideo codec started acting up. iI your'e getting good quality with nVDVD's mpeg then you may want to take Inetrvideo out (and put back later if you want). I didn't see much wrong in your log (though I am by no means an expert at that). Yes the mpeg codec has everything to do with LiveTV. Eric
__________________
Big old Server with plenty of power. 5 HDs and a 280 Nvidia graphic card. Windows XP Pro. Firefly. ZvRemote. 2 Dish Network HD receivers. 2 HDPVRs Out to ZeeVee Box for all HDTVs
|
|
02-17-2004, 10:51 PM
|
|||
|
|||
|
I had the exact same problem and cant figure it out. One day it runs awesome and there are no complaints from me then all of a sudden it starts to lock up and stuff. I reinstalled BTV and of course it works fine, but then starts acting up again.
I am also getting a lot of crashes from BTV, but again finally got it working the way it should work then starts to act up. Anyone have any ideas? Edit: I tried using NVDVD to see if it fived it but still get the same results. My log is below. [2/17/2004 23:54:16] ****************************** [2/17/2004 23:54:16] Starting the Log.... [2/17/2004 23:54:16] Version: 3.4 Build: 1154 [2/17/2004 23:54:16] Current License Mode: REGISTERED [2/17/2004 23:54:16] 1-1. Creating Security. [2/17/2004 23:54:19] 1-2. Creating BatchProcessor. [2/17/2004 23:54:19] 1-3. Creating Guide Updater. [2/17/2004 23:54:19] Batch Processor Running [2/17/2004 23:54:20] 2. Creating Master. [2/17/2004 23:54:20] 2-1. Creating Worker Handler Collection. [2/17/2004 23:54:20] 2-2. Creating Profile Collection. [2/17/2004 23:54:20] 2-3. Creating Master Device Collection. [2/17/2004 23:54:20] 2-5. Creating PVR. [2/17/2004 23:54:20] 2-6. Creating Dispatcher. [2/17/2004 23:54:20] 2-7. Creating Master Downloader. [2/17/2004 23:54:20] 2-8. Creating Master Storage. [2/17/2004 23:54:20] 2-9. Creating Remote Recordings. [2/17/2004 23:54:20] 2-10. Connecting Worker Handler Collection. [2/17/2004 23:54:20] 2-11. Connecting Dispatcher. [2/17/2004 23:54:20] 3. Creating Worker. [2/17/2004 23:54:20] 3-1. Creating Tuner Info Collection. [2/17/2004 23:54:20] 3-3. Creating Worker Downloader. [2/17/2004 23:54:20] 3-4. Creating Device Collection. [2/17/2004 23:54:20] 3-5. Creating Worker Storage. [2/17/2004 23:54:20] 3-6. Creating Worker Recorder. [2/17/2004 23:54:20] Guide Updater started. [2/17/2004 23:54:21] 4. Creating IP Monitor. [2/17/2004 23:54:22] 5. Starting up the Master [2/17/2004 23:54:22] 5-1. Starting SnapStream.Net threads. [2/17/2004 23:54:22] 5-3. Successfully started SnapStream.Net threads. [2/17/2004 23:54:22] 6. Starting up the Worker [2/17/2004 23:54:22] Incoming connection from 192.168.2.39 ... [2/17/2004 23:54:22] 7. Starting up the IP Monitor [2/17/2004 23:54:22] 8. Starting Web Service Threads. [2/17/2004 23:54:22] Starting the timeshifting engine. [2/17/2004 23:54:23] Failed to download remote recordings: (0x80004005) EXCEPTION: (null). [2/17/2004 23:54:23] Failed to get subscription state: EXCEPTION: (null). [2/17/2004 23:54:23] Unable to detect valid SnapStreamNet subscription. [2/17/2004 23:54:23] Requested dimensions: 640 x 480 [2/17/2004 23:54:23] MPEG-2 Video Recording bitrate: 7000000 [2/17/2004 23:54:23] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 23:54:23] MPEG-2 Noise Filter disabled [2/17/2004 23:54:23] MPEG-2 Motion Precision set to 1% [2/17/2004 23:54:23] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 23:54:23] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 23:54:23] Default FileFormat is currently: MPEG-2 [2/17/2004 23:54:23] Failed to report status back to SnapStream.Net: EXCEPTION: (null). [2/17/2004 23:54:23] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 23:54:24] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 23:54:24] Using "Video SVideo" crossbar input. [2/17/2004 23:54:24] Setting country code: 1 [2/17/2004 23:54:25] Set TV format to NTSC_M. [2/17/2004 23:54:26] Using "Video SVideo" crossbar input. [2/17/2004 23:54:26] Using "Video SVideo" crossbar input. [2/17/2004 23:54:27] Entering True Fullscreen Mode. Some ATI cards may not work properly. [2/17/2004 23:54:28] Warning: your default channel line-up contains a duplicate channel 358. [2/17/2004 23:54:38] Using "Video SVideo" crossbar input. [2/17/2004 23:54:38] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 23:54:38] Using third-party MPEG-2 video decoder "NVIDIA Video Decoder" for timeshifted TV. [2/17/2004 23:54:38] Decoder guid: 212dc710-3235-44a4-bd29-e1652bbcc71c [2/17/2004 23:54:38] TSSourcePlayer: Connected to the VMR9. [2/17/2004 23:54:53] The Full Screen Interface is closing itself in response to an internal close/restart message. [2/17/2004 23:56:52] Halting the recording engine. [2/17/2004 23:56:52] Recording engine halted. (0) [2/17/2004 23:56:52] Requested dimensions: 720 x 480 [2/17/2004 23:56:52] MPEG-2 Video Recording bitrate: 9000000 [2/17/2004 23:56:52] MPEG-2 using 2 B-Frames and 4 P-Frames per group [2/17/2004 23:56:52] MPEG-2 Noise Filter disabled [2/17/2004 23:56:52] MPEG-2 Motion Precision set to 25% [2/17/2004 23:56:52] MPEG-2 Audio Bitrate is set to 224000 [2/17/2004 23:56:52] MPEG-2 Audio Sampling Frequency is set to 48000 [2/17/2004 23:56:52] Default FileFormat is currently: MPEG-2 [2/17/2004 23:56:52] Video capture device: Hauppauge WinTV PVR PCI II Capture [2/17/2004 23:56:52] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture' [2/17/2004 23:56:52] Using "Video SVideo" crossbar input. [2/17/2004 23:56:52] Setting country code: 1 [2/17/2004 23:56:53] Set TV format to NTSC_M. [2/17/2004 23:56:53] Using "Video SVideo" crossbar input. [2/17/2004 23:56:54] Using "Video SVideo" crossbar input. [2/17/2004 23:56:59] Entering True Fullscreen Mode. Some ATI cards may not work properly. [2/17/2004 23:57:00] Warning: your default channel line-up contains a duplicate channel 358. [2/17/2004 23:57:09] Using "Video SVideo" crossbar input. [2/17/2004 23:57:09] TSSourcePlayer: Using MPEG demultiplexer [2/17/2004 23:57:09] Using third-party MPEG-2 video decoder "NVIDIA Video Decoder" for timeshifted TV. [2/17/2004 23:57:09] Decoder guid: 212dc710-3235-44a4-bd29-e1652bbcc71c [2/17/2004 23:57:09] TSSourcePlayer: Connected to the VMR9. [2/17/2004 23:57:31] The Full Screen Interface is closing itself in response to an internal close/restart message. Last edited by Ellerbestyle; 02-17-2004 at 11:00 PM.
|
|
02-18-2004, 12:22 PM
|
|||
|
|||
|
I solved a bit of the mystery. It acts up if the Decoder is set to Intervideo , or Default <--which I assume is Intervideo , with NVDVD on it is much better picturewize but still shutters every few seconds for 1 or 2 frames , kind of annoying especially if I'll have to pay for it , I'm going to attempt to remove intervideo and reinstall it , any suggestion on which version is best?
__________________
My HTPC: Body: Antec Overture Screen: 36" RCA VGA Monitor UndertheHood - Abit nf7-s -AMD XP1800+ Jiuhb @ 2.0ghz. - 512M Corsair PC2700.- Nvidia 64m 8x ti4600. - memorex dualformat dvd + - r + - rw - samsung cdrw/dvd combo drive - 120gig 8mg cache 7200rpm westerndigital - 120gig 8mg cache 7200rpm seagate.
|
|
02-19-2004, 01:08 PM
|
|||
|
|||
|
Problem Solved
I was able to fix it all up , I uninstalled intervideo and reinstalled it and it worked fine.. No skipping no nothing , good stuff , I"ll play with the reg hacks again and see how cpu performance goes.. Thanks guys!!!!
__________________
My HTPC: Body: Antec Overture Screen: 36" RCA VGA Monitor UndertheHood - Abit nf7-s -AMD XP1800+ Jiuhb @ 2.0ghz. - 512M Corsair PC2700.- Nvidia 64m 8x ti4600. - memorex dualformat dvd + - r + - rw - samsung cdrw/dvd combo drive - 120gig 8mg cache 7200rpm westerndigital - 120gig 8mg cache 7200rpm seagate.
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Live Tv Playback freezing but timeshift continuing | rts23 | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 6 | 11-17-2006 01:54 AM |
| Live TV freezing after about 10 mins | Asmordean | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 4 | 10-22-2006 08:56 PM |
| BTV4 live TV video freezing | Phyberoptic | Beyond TV and Beyond TV Link | 6 | 01-14-2006 04:34 PM |
| No Audio for Live TV and Recordings | Denise Decker | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 20 | 12-17-2005 10:31 AM |
| Live tv freezing after 1-2 seconds | mogul411 | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 0 | 11-04-2004 08:30 AM |
Linear Mode
