|
|
01-22-2004, 03:58 AM
|
|||
|
|||
|
29.97 fps or 30.0 fps?
Since NTSC is actually 29.97 fps, should I use that or does it not matter?
Also, for WMV do most people use V8 or V9 codec? I tried both but didn't see too much benefit with V9, which also uses more CPU. Thanks, Bryan 
|
|
01-22-2004, 01:37 PM
|
||||
|
||||
|
29.97fps is the correct rate to use.
I personally use WMV7 (to transcode to), as the difference between 7 and 8 is barely noticeable, and 9 takes about 3 times as long!
__________________
V_D_O Processor: Intel P4 2.4B | RAM: 512MB DDR266 | Motherboard: Intel D845GBV2 | Graphics cards: 2x GeForce FX 5200 | Sound card: Creative Sound Blaster Audigy2 ZS | Tuner cards: Hauppauge WinTV Theatre, Adaptec VideOh! DVD MC USB2, Hauppauge WinTV PVR USB2 | Hard drives: Western Digital 40GB & 250GB 7200RPM 8MB cache | OS: Windows XP Pro SP1 | Remote: SS FireFly | Network: 100Mb/s wired & 54Mb/s 802.11g wireless | Video sources: DVB satellite receiver (IR by MyBlaster) & analogue cable
|
|
01-22-2004, 03:47 PM
|
||||
|
||||
|
How / where does one make the WMV selection. I have no recollection of a choise in this matter (but that proves little
 )
__________________
TomZ This is a test, this is only a test. Had this been your real life, you would have been told what to do. BTV 3.4.4 (Build 1334), Athlon XP 2000, 256m RAM, 120g maxtor ultra, ATI AIW 9000 Pro, PRV-250, DirecTV - RCA DRD 486 RH (controlled via serial port), Beyond TV 3.4.2, Television S-Video output (no monitor), Gyration wireless compact keyboard and mouse
|
|
01-23-2004, 03:23 AM
|
|||
|
|||
|
Re: 29.97 fps or 30.0 fps?
Quote:
__________________
CPU: P4 1.8A Northwood, Zalman CNPS7000-ALCU M/B: ASUS P4S800 GFX: Radeon 9200 TVCap: PVR-350 HDD: Seagate Barracuda 160Gb RAM: 1Gb OS: WinXP Pro SP2 External: Sky Digibox, 'Joseph Heenan' Sky Controller, Sony 29" TV
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
