changing video inputs

[AzDragonLord]

I'm using BeyondTV 4.4 and I finally set my Hauppauge PVR-150 to accept inputs from both S-Video (cablebox) and directly from cable feed. It was S-video only before. I know I can go into already scheduled recordings to change the source of the recordings, either cable or S-video, but how can I make that choice when I initially set up the recording? If I set up a new recording, it defaults to the S-video input without giving me a choice. Thanx in advance.

[AzDragonLord]

No one???

[Fonceur]

If you want the coax to be the first choice, delete the first Video input (s-video) and recreate it. This way it will become second. Though the best way would be to use 2 different lineups, one for the analog cable (coax) and another for your digital lineup (hide all the channel availables on the analog feed).

[Terminal]

I use the exact same setup as you describe. What you need to do is set a different lineup for each video source. In my case I have a standard cable guide that has channels 2 through about 77, I then have a cable box lineup that has channels 2 through 900 for my cable box. In the cable box guide I hide all the lower channels which coincide with the analog channels. Since the lower channels are not available on the cable box and I select one of these channels it automatically uses the tuner video source. Since the higher channel numbers are not available on the tuner input when I select one of those channels it uses the cable box video source.

Check out this thread I posted some pics of my setup.

http://forums.snapstream.com/vb/showthread.php?t=34148

[AzDragonLord]

I'll set that up. Thanx