I have fly vidio98 TV card can you help

I now its not suported yet but if eny one has got it working can you please tell me how

[Sparhawk]

Unless I'm mistaken, you should be able to use the card just fine by selecting DirectShow for both the capture and tuning interfaces. And make sure you are using the latest drivers from LifeView.

So far, we've had terrific results with this card in our in-house testing. It's been very stable and has consistently performed well. If you're having trouble with it, email me at techsupport@snapstream.com or post the details here so we can fix it.

Frank Garcia

SnapStream Media Technical Support
email: techsupport@snapstream.com
website: http://www.snapstream.com/support

Re installed windows so I had a clean system to work with.
Run a few tests Hope the results help
Also would like to no is this the same program that was shown on BBC
Tomorrows World about One year ago If not then it should of been

Ant

System

Mother board ABit KT7
Processor AMD 700Mhz
Memory 128mgb

Harddrive Fujitsu 4.3gig

CD drive 52x Lg. CD-ROM CRD-8520B
Mitsumi CR.-281TE Recorder

floppy 1.44

Display NVidia Riva 128 AGP
Voodoo2
ASTVision 4L Monitor

Sound Creative AWE64

Network Adapter Realtek RTL8029(AS)PCI Ethernet NIC

TV Card FlyVideo98 (Remote No Radio)

Software

Windows98se Build 4.10.2222A

FlyVideo`98 Build 5.96

Windows Media Player Build 7.00.00.1956

Windows Media Player Bonus Pack build 4.1

DirectX 8.0 build 4.08.00.0400

SnapStream sspvs-lattest (V1.00 Freeware)

NEW WINDOWS INSTALLED NO OTHER SOFTWARE INSTALLED


Problem

No errors in device manager
DX Checks All ok
media player no problems

Flyvideo Installed Ok and running with sound & video OK Recording
Ok A few dropped packets on Higher window recording Size.

SnapStream Installed OK set-up detected
Capture Interface AViCap Altered to direct Show
Video Device FlyVideo`98 Capture Drive
Audio Device AWE64 Wave In [220]
Tuning interface Detected Hauppauge WinTv Driver Altered to Direct show
Recording Profile Near VHS
Target Directory C:\Programme Files\Snapstream PVS\show

One Cannel Set Frequency 670

Primary Settings Antenna United Kingdom

Diagnostic Test Says Ok but after 5 Seconds Sound Comes on PC lockup
Reboot scandisk runs
Go to watch click on your intro Mplayer loads sound video ok Full screen
Mode Ok
Go to record
Record Now,
Channel 1
name test 1
submit
new window Recording now
Sound heard but not of program
P.C. Locked out
No hard drive activate But Mouse still working,
Red circle on task Bar
No ctrl Alt Del
rebooting PC


****************************************

[1/15/2001 16:16:39] Created Tracker Client thread.
[1/15/2001 16:16:39] Jobs.Load: Vx.x file, 0 of 0 jobs loaded.
[1/15/2001 16:16:39] Server: Listening on port 8128.
[1/15/2001 16:16:39] Created Server thread.
[1/15/2001 16:16:39] Shows.Load: Loading and regenerating show data...
[1/15/2001 16:16:39] CSSShows.Load: Vx.x file, 0 of 0 shows loaded.
[1/15/2001 16:16:39] Slave: Connecting to 127.0.0.1...
[1/15/2001 16:16:39] Created Slave thread.
[1/15/2001 16:16:39] Slave: Connection with master 127.0.0.1 established.
[1/15/2001 16:16:39] WMS: Listening on port 1755.
[1/15/2001 16:16:39] Created WMS thread.
[1/15/2001 16:16:39] HTTPD: Listening on port 8129.
[1/15/2001 16:16:39] Created HTTPD thread.
[1/15/2001 16:16:39] WMSUDPThd: Listening on port 1755.
[1/15/2001 16:16:39] PortForwarder: Listening on port 80.
[1/15/2001 16:16:39] Created PortForwarder thread.
[1/15/2001 16:16:39] ThreadStartup: All threads initialized.
[1/15/2001 16:16:39] ServiceStart: Working directory is "C:\Program
Files\SnapStream PVS"
[1/15/2001 16:16:40] Slave: Received challenge, sending response.
[1/15/2001 16:16:40] Server: 127.0.0.1 authenticated as slave.
[1/15/2001 16:16:40] Slave: Authentication successful. Updating master.
[1/15/2001 16:16:40] Slave: Machine statistics sent.
[1/15/2001 16:16:40] Slave: Show information sent.
[1/15/2001 16:16:40] Slave: Synchronization with master complete.

**********************************

Go to Configure Recording Setings
Chang Capture Interface To AVICap
Chang Tuning interface to Hauppauge WinTv Drivers
Submit

Restarting P.C. To make sure new settings stored ok

Checking Tv card Sound Picture OK

Checking settings for configure ok

Go to Record
Record Now
Cannel 1
Name test2
Submit

Sound heard recording started
Stop Recording
watch recording
Mplayerloaded
Picture ok
No sound {to be expected}
full screen ok

All other settings not working or locking up PC etc

****************************************

[1/15/2001 16:43:16] Created Tracker Client thread.
[1/15/2001 16:43:16] Jobs.Load: Vx.x file, 0 of 0 jobs loaded.
[1/15/2001 16:43:16] Server: Listening on port 8128.
[1/15/2001 16:43:16] Created Server thread.
[1/15/2001 16:43:16] Shows.Load: Loading and regenerating show data...
[1/15/2001 16:43:16] CSSShows.Load: Vx.x file, 0 of 0 shows loaded.
[1/15/2001 16:43:16] Slave: Connecting to 127.0.0.1...
[1/15/2001 16:43:16] Created Slave thread.
[1/15/2001 16:43:16] Slave: Connection with master 127.0.0.1 established.
[1/15/2001 16:43:16] WMS: Listening on port 1755.
[1/15/2001 16:43:16] Created WMS thread.
[1/15/2001 16:43:16] WMSUDPThd: Listening on port 1755.
[1/15/2001 16:43:16] HTTPD: Listening on port 8129.
[1/15/2001 16:43:16] Created HTTPD thread.
[1/15/2001 16:43:16] PortForwarder: Listening on port 80.
[1/15/2001 16:43:16] Created PortForwarder thread.
[1/15/2001 16:43:16] ThreadStartup: All threads initialized.
[1/15/2001 16:43:16] ServiceStart: Working directory is "C:\Program
Files\SnapStream PVS"
[1/15/2001 16:43:17] Slave: Received challenge, sending response.
[1/15/2001 16:43:17] Server: 127.0.0.1 authenticated as slave.
[1/15/2001 16:43:17] Slave: Authentication successful. Updating master.
[1/15/2001 16:43:17] Slave: Machine statistics sent.
[1/15/2001 16:43:17] Slave: Show information sent.
[1/15/2001 16:43:17] Slave: Synchronization with master complete.
[1/15/2001 16:43:28] Record: Executing "test2"...
[1/15/2001 16:43:28] Tuning to channel 1 (670 Hz).
[1/15/2001 16:43:28] SetChannel: Hauppauge WinTV drivers are not installed
on this system.
[1/15/2001 16:43:28] Record: Connected to FlyVideo'98 Capture Driver.
[1/15/2001 16:43:28] Record: Current format: RGB, BPP=16
[1/15/2001 16:43:28] Record: Setting capture format to 320x240, RGB, BPP=16
[1/15/2001 16:43:28] Record: AVICap initialized.
[1/15/2001 16:43:29] Record: Writer initialized.
[1/15/2001 16:43:29] Record: Beginning to record "test2" ...
[1/15/2001 16:43:29] Master: Error - slave has started to record an unknown
show.
[1/15/2001 16:43:50] TrackerClient: Connect failed.
[1/15/2001 16:44:35] Record: Halting capture.
[1/15/2001 16:44:35] Record: Capture complete.
[1/15/2001 16:44:35] Record: Writer uninitialized.
[1/15/2001 16:44:35] Record: AVICap uninitialized.
[1/15/2001 16:44:35] Record: Cleanup complete. Processing file.
[1/15/2001 16:44:35] IndexThread: Leftover index.asf found and deleted.
[1/15/2001 16:44:36] Master: Error - *** finished recording an unknown
show.
[1/15/2001 16:45:05] Shows.MemoryInsert: Added "test2-0-01-15-2001.asf" to
the show database.

***************************************

Are you ever going to get this to work ?
Come on this is looking very bad for you.
You are going to loos a sale.

[rkuo]

ant,

Are the drivers for the Flyvideo TV98 WDM or VFW model drivers?

I don`t no which typ how can i find out .
I am yousing the latest drivers from lifeview
for win95/98 version 5.96 the latest on there web site. My card the version with remote controll not the one with radio.
I have installed the program on a frends pc and his is working fine, but he wont let me have his TV card some frend he terned out to be. If you can tell me where to look to find out which version I am yousing I will gladly look
Thanks
Ant

just found out they are for the WDM
hope it helps