Windows XP

I can not manage to get the program recording under windows xp

[1/2/2002 17:01:47] Slave: Next recording - "ok"
[1/2/2002 17:01:47] Master: Dispatched "ok".
[1/2/2002 17:01:57] Slave: Received execute command for "ok".
[1/2/2002 17:01:57] Record: Now recording "ok" ...
[1/2/2002 17:01:57] Record: Video Source: "Primary"
[1/2/2002 17:01:57] Record: Target store: "Common"
[1/2/2002 17:01:57] CProfile::GetByID failed.
[1/2/2002 17:01:57] Record: Quality profile: "Near VHS"
[1/2/2002 17:01:57] Tuning to channel 1 (1250000 Hz).
[1/2/2002 17:01:57] Loading tuning interface "Hauppauge WinTV PCI series" (hauppauge.dll).
[1/2/2002 17:02:00] Record: Capture Interface: DirectShow.
[1/2/2002 17:02:00] Video: "Hauppauge WinTV Capture" is selected.


After that I get an winxp error box, the details are this:

ssd Error signature:
AppName: ssw.exe AppVer: 2.0.0.1331 ModName: rmmpeg2.ax
ModVer: 4.6.139.0 Offset: 0001c566

I don't get this kind of error on my windows 2K nor windows 98 machine, only on the xp one.
It's a PIII 733 with 512 mb ram.

ow yeah, before you ask

//================================================== ===
Exception code: C0000005 ACCESS_VIOLATION
Fault address: 6501C566 02:00003566 C:\WINDOWS\System32\rmmpeg2.ax

Registers:
EAX:00000000
EBX:00EAD27C
ECX:0000F99C
EDX:0000027F
ESI:00EAD050
EDI:00E8CF90
CS:EIP:001B:6501C566
SS:ESP:0023:022EEF14 EBP:022EF138
DS:0023 ES:0023 FS:0038 GS:0000
Flags:00010246

Call stack:
Address Frame
6501C566 022EF138 0002:00003566 C:\WINDOWS\System32\rmmpeg2.ax
771C6626 022EF1AC CoGetTreatAsClass+5EC
771C63D2 022EF1D8 CoGetTreatAsClass+398
771C670D 022EF21C CoGetTreatAsClass+6D3
771C669F 022EF238 CoGetTreatAsClass+665
771C5A82 022EF258 CoGetObjectContext+2DC0
771C5A42 022EF290 CoGetObjectContext+2D80
771C675F 022EF2B8 CoGetTreatAsClass+725
771C63D2 022EF2E4 CoGetTreatAsClass+398
771C6464 022EF534 CoGetTreatAsClass+42A
771C63D2 022EF560 CoGetTreatAsClass+398
771C6329 022EFC90 CoGetTreatAsClass+2EF

[amit]

If you change your tuning interface to Directshow instead of Hauppuage WinTV PCI series, does this still crash still occur?

The site of hauppauge learned me that it would be better to use an older driver with the Theatre version of the card, so I did, and that fixed it

thanx anyway

It seems that i am unable to use the software (hangs on: start recording, hardware wizard,...) using the WDM driver of hauppauge, only with the standard mode driver. I am trying to use the latest beta driver, but i don't think that will work either.
On a windows 9x box it would be easy to use the regular driver because there is a nice beta that runs wel, but isn't compatible with NT-family (nt, 2k, xp) and the older driver has some nasty bugs.

Anyway, I hope there is a way to use my Haupauge card with the WDM driver and this nice piece of software.