![]() |
|
#1
|
|||
|
|||
|
TV Slow to Load
Howdy all,
I have recently come up with a issue. When going in to record shows, I was starting to have this issue in which all of the files are like 512K (a mere 2 seconds of recording) I thought it was because I had like 5 days left on Trial, so I purchased the whole package to see if this would help fix. But alas, no. 1st test, load up live TV.. well this took 3 minutes to do!!!! Never did that b4. The network traffic was lit with a minor amount of traffic, no virus either) I think this is the starting point of my issue. Went to a channel that I had setup to record in like 10 minutes. Come the time to record.. Snapstream started do its "thing" Show finished, no prob got it sights and sounds. (At the end of the log file you will see its compression being done) Next task was to pad the recording by 4 minutes, to give maybe the TV time to turn on. No effect, the South Park show only sized up 512K. (TV not started by me.) Went as far as to Uninstall.. reinstall... SNapStream, Vid Drivers, DX9, Windows Media 9.... Nada. So if you look below in this log file, you will see the starting point of the SouthPark Episode. And you will see the failure line. Again, being that the TV takes 3 minutes to load, leads me to believe something is amiss. Trying to avoid redoing the whole machine, not a super pain, but would like to see if there is a easier fix for my new 60 buck product. (Ati Guide Plus is nice.. but Snap is much nicer, and not forced with their codec) Any thoughts before I scream refund? Many Thanks!!!!! [12/7/2003 01:57:00] Starting a recording, Always Timeshifting is currently deactivated. [12/7/2003 01:57:00] Requested dimensions: 640 x 480 [12/7/2003 01:57:00] MPEG-2 Video Recording bitrate: 7000000 [12/7/2003 01:57:00] MPEG-2 using 2 B-Frames and 4 P-Frames per group [12/7/2003 01:57:00] MPEG-2 Noise Filter disabled [12/7/2003 01:57:00] MPEG-2 Motion Precision set to 1% [12/7/2003 01:57:00] MPEG-2 Audio Bitrate is set to 224000 [12/7/2003 01:57:00] MPEG-2 Audio Sampling Frequency is set to 48000 [12/7/2003 01:57:00] Default FileFormat is currently: MPEG-2 [12/7/2003 01:57:00] Video capture device: ATI Rage Theater Video Capture [12/7/2003 01:57:00] Creating card builder for 'ATI Rage Theater Video Capture' [12/7/2003 01:57:00] Set capture dimensions: 640 x 480 [12/7/2003 01:57:00] Device-specific capture graph built successfully! [12/7/2003 01:57:00] Not using integrated audio [12/7/2003 01:57:00] Audio capture device: Avance AC97 Audio [12/7/2003 01:57:00] Using "Video Tuner" crossbar input. [12/7/2003 01:57:00] Setting country code: 1 [12/7/2003 01:57:01] Set TV format to NTSC_M. [12/7/2003 01:57:01] DMO Recording Video bitrate: 636000 [12/7/2003 01:57:01] DMO Encoding at: 320 x 240 [12/7/2003 01:57:01] Streaming//WMV Video recording bitrate: 636000 [12/7/2003 01:57:01] Streaming//WMV Audio recording bitrate: 48024 [12/7/2003 01:57:01] Setting Broadcast port: 8080 [12/7/2003 01:57:39] Using "Video Tuner" crossbar input. [12/7/2003 01:58:18] Using "Video Tuner" crossbar input. [12/7/2003 01:58:18] Using the store: Vids [12/7/2003 01:58:18] Recording to MPEG-2 format [12/7/2003 01:58:18] TimeShift Sink successfully started recording [12/7/2003 01:58:23] Show Monitor: found new show South Park-(Butt Out)-2003-12-07-0.mpg in d:\vids. [12/7/2003 01:58:57] Using "Video Tuner" crossbar input. [12/7/2003 01:58:57] Starting a recording, Always Timeshifting is currently deactivated. [12/7/2003 01:58:57] Started the recording 'South Park' successfully. [12/7/2003 01:58:57] COSlave::StartRecordingNEW failed to start , err=80004005[12/7/2003 01:58:57] Halting the recording engine. [12/7/2003 01:58:58] The recording stopped prematurely. [12/7/2003 01:58:58] Recording engine halted. (0) [12/7/2003 02:00:00] DIVXRecompressor recompressing from file: d:\vids\Justice League-(Wild Card)-2003-12-06-0.mpg to file: d:\vids\12b7eddc-493b-47b5-8b6e-e7b79a09be81.tmp [12/7/2003 02:00:01] Using DivX Standard Encoder [12/7/2003 03:03:46] DIVXRecompressor - Filter based recompression pass completed [12/7/2003 03:03:46] Recompression of d:\vids\Justice League-(Wild Card)-2003-12-06-0.mpg to DivX completed. [12/7/2003 03:03:48] Tagging of d:\vids\12b7eddc-493b-47b5-8b6e-e7b79a09be81.tmp completed. [12/7/2003 03:03:51] Show Monitor: found new show Justice League-(Wild Card)-2003-12-06-0.avi in d:\vids. Again, any thoughts are welcome!!!
__________________
AMD 3800 X2 (939) 1 Gig DDR 2700 300 Gig Seagate Sata 2 Win XP Pro Sp2 Antec NSK4400 Geforce 6200 Snap Stream 4.3 Happauge 500MCE (Type A fried.. testing Type B Rev E787) |
|
#2
|
||||
|
||||
|
since you are using an ati aiw card make sure the following:
- You disable ALL power management - You disable all screen savers abilities to lock the workstation / force you to the xp fast user screen - That you remain logged in as the user that started snapstream - That you do not run any opengl or direct3d programs that will change the screen resolution - That you do not use XP's remote desktop feature if you have any of the above turned on then the aiw card will fail to begin recordings because their drivers suck. if you want the ability to do any of these while recording then I would suggest you go get a different video card, ati has known of this issue (even happens with their own software) for atleast 2 years and has not fixed it yet. the long startup time is from a video driver or capture driver or installed video codec being the problem and 9 times out of 10 the only way to fix that is a full wipe/reinstall |
|
#3
|
|||
|
|||
|
Robert you are fast on this board.
I did some more re-vised searches here. http://kb.snapstream.com/Kb.aspx?kbid=1050 This link was referred to a lot... tried it... Works.(So far, just started, we will see when it ends) Since I never stream anyways, this is not a big issue. Still, I would like to see maybe a sticky on this KB. And to see if SnapStream can "update" their software. It reminds me of my motorcycle, everyone had a issue with a certain aspect, and the manufacturer would not own up to it, until a lawsuit was filed. (Me thinks we won't get this far :P ) Side note, sleep options off as test earlier too. It also auto logs right to desktop. Remote Admin shutdown from OS install.
__________________
AMD 3800 X2 (939) 1 Gig DDR 2700 300 Gig Seagate Sata 2 Win XP Pro Sp2 Antec NSK4400 Geforce 6200 Snap Stream 4.3 Happauge 500MCE (Type A fried.. testing Type B Rev E787) |
|
#4
|
|||
|
|||
|
Just a small update for the folks who might have similar issues. So far that KB article has helped. I recorded a 2 hour Movie without any issue.
Hope this helps a bit.
__________________
AMD 3800 X2 (939) 1 Gig DDR 2700 300 Gig Seagate Sata 2 Win XP Pro Sp2 Antec NSK4400 Geforce 6200 Snap Stream 4.3 Happauge 500MCE (Type A fried.. testing Type B Rev E787) |
|
#5
|
||||
|
||||
|
I know you seem satisified but just to help you out it is highly highly recommended that you try a PVR250 its $139.99 standalone or $179.99 with Snapstream included, and makes the world of difference in terms of performance. My current CPU usage is 0 to 2% recording, and 10 to 15% playback.
Just a thought, Brett
__________________
A Sample of My Beyond Media Projects: Game Library: Browse and play your ROMS, Arcade Games, and PC Games within BM! MSN Messenger for BM: Add MSN Messenger to BM. Includes MSN notifications over any module, and a chat client! PIN Plugin for BM: Add PIN protection to any module in BM, including the settings! BTV Recorded Shows: Brings the BTV Recording Library into BM with full show details. Last edited by Brett; 12-07-2003 at 05:11 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| BTV 4.1 very slow to load | nafreire | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 8 | 04-13-2006 07:08 AM |
| Beyond Media is Slow to load | draiko4 | Beyond Media Discussion | 0 | 10-17-2005 02:57 PM |
| recorded show played in slow slow mo.. | Mobious | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 3 | 08-02-2005 06:12 AM |
| Apps load slow after installing BTV | Edellow | Beyond TV and Beyond TV Link | 1 | 01-25-2005 10:55 AM |
| recording page come out so slow and postprocessing slow too | yejun | Beyond TV and Beyond TV Link User-to-User Troubleshooting & Support Forum | 0 | 12-15-2001 12:15 AM |