Problem with "failed to build live TV graph"

[kreide]

I'm trying to get BeyondTV to work on my MSI Mega PC with a PVR-250 capture card, but so far no luck. I get the "failed to build live TV graph" whenever BTV tries to actually display video. The WinTV software works perfectly, however. Here is the relevant part from the log:


[9/10/2004 08:53:57] Using default video renderer for playback
[9/10/2004 08:53:57] Requested dimensions: 480 x 576
[9/10/2004 08:53:57] MPEG-2 Video Recording bitrate: 5000000
[9/10/2004 08:53:57] MPEG-2 using 2 B-Frames and 4 P-Frames per group
[9/10/2004 08:53:57] MPEG-2 Noise Filter disabled
[9/10/2004 08:53:57] MPEG-2 Motion Precision set to 1%
[9/10/2004 08:53:57] MPEG-2 Audio Bitrate is set to 224000
[9/10/2004 08:53:57] MPEG-2 Audio Sampling Frequency is set to 48000
[9/10/2004 08:53:57] Default FileFormat is currently: MPEG-2
[9/10/2004 08:53:57] Video capture device: Hauppauge WinTV PVR PCI II Capture
[9/10/2004 08:53:57] Creating card builder for 'Hauppauge WinTV PVR PCI II Capture'
[9/10/2004 08:53:57] Set TV format to PAL_B.
[9/10/2004 08:53:57] Using "Video Tuner" crossbar input.
[9/10/2004 08:53:57] Setting country code: 47
[9/10/2004 08:53:58] Using "Video Tuner" crossbar input.
[9/10/2004 08:53:59] Using "Video Tuner" crossbar input.
[9/10/2004 08:53:59] Using "Video Tuner" crossbar input.
[9/10/2004 08:54:00] TSSourcePlayer: Using MPEG demultiplexer
[9/10/2004 08:54:00] CFSTSSourcePlayer::AddConnectDemux - 'ConnectFilters( m_pFSource, m_pFDMux, m_pBuilder );' failed, err = 0x80004005
[9/10/2004 08:54:00] CFSTSSourcePlayer::AddAndConnectFilters - 'AddConnectDemux( &pVideoPin, &pAudioPin, &bMPEG1Audio );' failed, err = 0x80004005
[9/10/2004 08:54:00] CFSTSSourcePlayer::InitHelper - AddAndConnectFilters failed, err = 0x80004005
[9/10/2004 08:54:00] TSSourcePlayer: Using MPEG demultiplexer
[9/10/2004 08:54:01] CFSTSSourcePlayer::AddConnectDemux - 'ConnectFilters( m_pFSource, m_pFDMux, m_pBuilder );' failed, err = 0x80004005
[9/10/2004 08:54:01] CFSTSSourcePlayer::AddAndConnectFilters - 'AddConnectDemux( &pVideoPin, &pAudioPin, &bMPEG1Audio );' failed, err = 0x80004005
[9/10/2004 08:54:01] CFSTSSourcePlayer::InitHelper - AddAndConnectFilters failed, err = 0x80004005
[9/10/2004 08:54:01] MovieWindow: Failed to initialize live TV player

Any help is greatly appreciated!

[JDog2112]

I am having the exact same problem. Today I switched from the ATI TV Wonder Pro, to the PVR-250. The WinTV software runs just fine, but now BTV doesn't work and I get the dreaded "Failed to build TV Graph blah blah blah" message.

I use the PVR-250 with a GeFroceFX 5900. I downloaded the lastest drives for the PVR, and was already using the latest nVidia drivers. I tried running the setup wizard on BTV and still got the same message. I also did a partial removal with no luck. I found a thread in the Snapstream Knowledge base that addressed this issue specifically, but after going throught the steps, I sill get the same message. Maybe a complete reinstall of BTV will solve the problem, but I haven't tried just yet.

Has anyone else encountered this issue and sucessfully fixed the problem? Your help would be greatly appreciated. Thanks in advance.