Can't seem to get this set up correctly

[Mal]

I am trying to set this up in the uk.

With first attempt at installation meant I was able to get BBC1 to work but could not get any other channels to record .... they just recorded BBC1.

So I de-installed and re-installed and now I can't record anything other than white noise.

I have a Hauppauge Win TV theatre card which works with out problem.

BBC1 is on Hauppauge Channel 70 which I have entered into the SnapStream Channel set up screen as both 863.25 & 863250000.
BBC2 is on Hauppauge Channel 63 which I have entered into the SnapStream Channel set up screen as both 807.25 & 807250000.
ITV is on Hauppauge Channel 60 which I have entered into the SnapStream Channel set up screen as both 783.25 & 783250000.
Channel 4 is on Hauppauge Channel 66 which I have entered into the SnapStream Channel set up screen as both 831.25 & 831250000.
Channel 5 is on Hauppauge Channel 54 which I have entered into the SnapStream Channel set up screen as both 735.25 & 735250000.


I'd really appreciate help in getting this to work.

Thanks
Mal

[Mal]

Following up my own post :-)

I hadn't realised that the channel set up meant you had to co-relate the channel number with the channel setting on the Hauppauge card. It seems silly now but not intuitive for me :-(

So I got that sorted out and hit the "I can only recod one channel" problem referred to in this forum.

I am using WDM drivers so I am going to try the VFW ones now.....

More l8r
Mal

[Sparhawk]

Hi Mal,

How have the VFW drivers worked out for you? Did they solve the tuning problem?

Frank Garcia

SnapStream Media Technical Support
email: techsupport@snapstream.com
website: http://www.snapstream.com/support

[Mal]

Yes, the new drivers have sorted out the tuning problem .... plus I now understand more about how the TV card works!!

I have the problem I described in the other post about the sound on the right channel disappearing after 5 seconds of recording and the left channel getting muffled.

If you have advice on how to overcome that, Frank, I'd be v. grateful.

Rgrds
Mal

[rakeshagrawal]

Mal-- did you get anywhere with this issue or are you still experiencing this audio problem? --Rakesh